Flex Adhesive

Regular price $60.00
Shipping calculated at checkout.

The PLA Flex Adhesive is great for advanced lash artists, and is not an adhesive for beginners. Flex has a super wide range, working in 20-75% humidity. We have tested this adhesive at every humidity level, ensuring that it works in many environments. Flex can be a quick adhesive, curing at 0.5-1 second. We use clean raw materials and fast polymerisation, resulting in low fumes. Flex stays fresh longer before needing a new drop during your appointments. Flex adhesive should never be frozen or kept in a refrigerator.

PLA’s Flex Adhesive has a treated bottle, allowing no fumes to be emitted. This increases the shelf life and leaves a safer adhesive for both lash artists and their clients.

Each bottle has been batch tested for safety by an independent toxicologist in the UK for grades to meet EU cosmetic regulations. We test each batch to ensure consistency and performance are maintained. Blended and packaged for Paris Lash Academy in the UK.

Flex is a great option for you if:

  • You are an advanced lash artist
  • You want fast curing
  • Any humidity

Fast Facts:

  • 5 mL bottle
  • UK and EU registered compliant
  • Low fume
  • Strength: Approximately 6-7 weeks
  • Stable for up to 3 months opened
  • Viscosity: Thin
  • Drying Time: under 0.5-1 second
  • Color: Black
  • Oil and water resistant.
  • Bottles are NOT pre- punctured, puncture with provided push pin
  • All PLA Adhesives are cruelty free and never tested on animals
  • Blended and packaged for Paris Lash Academy in the UK
  • Do not place on a nonreactive surface

Suggested Environment

  • Ideal Temperature: 68-75 °F / 20-24 °C
  • Optimal humidity is 20%-75%
  • Higher humidity = quicker cure
  • Lower humidity = slower cure


  • Ethyl-2-Cyanoacrylate, Trimethylolpropane triacrylate, Butrylated Hydroxyanisole, Carbon Black
  • No Animal Ingredients
  • 100% Vegan
  • Cruelty-Free
  • Latex Free


  • Please store in cool, dark container or in our adhesive container with silica gel, out of UV light.
  • Unopened adhesive is good for 1 year. Do not refrigerate or freeze.
  • Once opened, adhesive is good for up to 3 months under proper storage conditions.
  • Shake for two minutes before using.

Warning: this product is intended for professional use only. Do not use this adhesive for self application or to apply cluster or strip lashes.

Liquid products, including adhesive, cannot be returned. If you are unhappy with your adhesive contact our customer service via email at sales@plapro.com.



Section 1 – Chemical Product and Company Identification


Flex Adhesive


1285 Financial Blvd

Reno, Nevada


Adhesive glue for applying


Section 2 – Composition and Ingredient Information

Ingredient Component Name

Ethyl-2-Cyanoacrylate CAS No: 7085-85-0 50-100%

Trimethylolpropane triacrylate CAS No: 15625-89-5 <0.9%

Butrylated Hydroxyanisole CAS No: 25013-16-5 <0.1%

Carbon Black CAS No: 1333-86-4 0.1-1%

Section 3 – Hazards Identification

Hazard Risk Classification

Classification of the ingredients according to (EC) No. 1272/2008 (CLP):

CAS No: 7085-85-0: Skin irrit. 2, H315, Eye irrit. 2, H319, STOT SE 3, H33

CAS No: 15625-89-5: Skin irrit. 2, H315, Skin sens. 1 H317, Eye irrit. 2, H319

CAS No: 25013-16-5: Aqua chron. 2, H411

Eye: Irritating to eyes. Liquid or high vapor concentration can cause pain and irritation with slight corneal injury possible

Skin: Prolonged or repeated skin contact can cause irritation and dermatitis through defatting of skin. Prolonged contact can result in skin absorption

Inhalation: May cause respiratory tract irritation.

Ingestion: Can cause burning of nose and throat.

Section 4 – First Aid Measures


Supply fresh air; consult doctor in case of complaints.

Eye Contact

Rinse opened eye for several minutes under running water then consult a doctor.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.


Consult a doctor immediately.

Section 5 – Fire Fighting Measures

Specific Hazard


Flash Point


Auto Ignition temperature


Flammable/Explosive Limits-lower%


Flammable/Explosive Limits-upper%


Hazardous Decomposition Materials


Suitable Extinguishing Media

Carbon dioxide, sand. DO NOT USE WATER.

Protective Equipment

Wear a self-contained respiratory protective device.

Hazardous combustion products


Unusual fire or explosion hazard


Section 6 – Accidental Release Measures

Environmental precautions

Do not allow product to reach sewage system or any water course.

Disposal and Clean Up

Allow to solidify. Pick up mechanically. Ensure adequate ventilation

Personal Precautions

Protective equipment and emergency procedures Ensure adequate ventilation

Section 7 – Handling and Storage

Handling Precautions

Store in a cool, dry place in tightly closed receptacles. Keep away from heat and direct sunlight. Ensure good ventilation/exhaustion at the workplace. No special measures required about fire and explosion protection.


Store in a cool location. Store only in the original receptacle. Store away from oxidising agents. Keep container tightly sealed.

Section 8 – Exposure Controls and Personal Protection

Engineering Controls

The usual precautionary measures are to be adhered to when handling chemicals. Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Avoid contact with the eyes and skin

Respiratory Protection

Not necessary if room is well-ventilated. Use suitable respiratory protective device in case of insufficient ventilation.

Skin Protection

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. For penetration time, the exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. Rubber Gloves and PVC gloves are not suitable.

Eye/Face protection

Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards.

Section 9 – Physical and Chemical Properties

Physical State






Specific Gravity


Boiling Point


Flash Point




Evaporation Rate(Ether=1)


Ignition Temperature


Melting/Freezing Point




Vapour Density


Vapour Pressure


Volatile Organic Compound(EPA Method24)


Section 10 – Stability and Reactivity


Stable under recommended storage conditions

Conditions to Avoid

Avoid exposure to exothermic polymerisation. Reacts with alcohols. Reacts with alcohols, amines, aqueous acids and alkalis. Reacts with water and acids. Reacts with amines. Reacts with water. Reacts with alkali (lyes).

Incompatible Materials


Hazardous Polymerization


Hazardous decomposition

Note: Possibility of hazardous reactions-exothermic polymerisation

No decomposition if used according to specifications.

Section 11– Toxicological Information

Primary routes of entry: Inhalation (Yes), skin (Yes), Ingestion (Yes)

Effects of overexposure: On the skin: Irritant to skin and mucous membranes. On the eye: Irritating effect. Sensitisation: Sensitisation possible through skin contact. The product shows the following dangers: Irritant / May cause an allergic skin reaction / Skin Sensitivity.

Ethyl cyanoacrylate: LD50 Oral at >5000mg/Kg (CICAD (2001))

Ethyl cyanoacrylate: LD50 Dermal >2000mg/Kg (CICAD (2001))

Trimethylolpropane triacrylate: LD50 Oral >5000mg/Kg

Butylated hydroxyanisole: LD50 Oral 2,200 - 5,000 mg/kg

Section 12– Ecological Information


Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.


No data available

Bioaccumulative Potential

No data available

Mobility in Soil

No data available

Section 13– Disposal Consideration


Must not be disposed together with household garbage. Do not allow product to reach sewage system.


Section 14– Transport




UN/NA: Void






UN/NA: Void

Section 15– Regulatory Information

This safety data sheet complies with the regulatory requirement

Section 16– Other Information


All the information in the Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. Tong Shen cannot accept any liability for the results whatsoever arising from the use of Tong Shen’s products due that the utilization of these products is simply out of Tong Shen’s control. The users are responsible for selecting the suitability of the products and methods of use.


Canceling a Subscription: To cancel your subscription, please contact us at sales@plapro.com with a minimum of 24 hours notice prior to your next billing date. This will allow us to process your cancellation request asap and ensure that it is applied to the next billing cycle.Please note that canceling a subscription does not cancel an order that has already been confirmed or stop a pending charge. If you have any questions or concerns about your subscription, please reach out to us at sales@plapro.com.

Updating Shipping Addresses: To update the shipping address for a future subscription shipment, please contact us at sales@plapro.com with a minimum of 24 hours notice before your next billing date. This will give us enough time to process your request and ensure that your order is delivered to the correct address.Please note that subscription orders that have already been confirmed with an order number cannot be edited. If you have any questions or concerns about updating your shipping address, please reach out to us at sales@plapro.com.

Updating Payment Methods: To update the payment method for your subscription, please email us at sales@plapro.com. We will provide you with a secure link to update your payment information.Please note that subscription orders that have already been confirmed with an order number cannot have payment changes. If you have any questions or concerns about updating your payment method, our customer service team is available to assist you.

Subscription Return Policy: Due to the nature of our adhesives, we are unable to accept returns or exchanges. However, if you are not satisfied with your adhesive, please contact us at sales@plapro.com.