Our PLA Supreme Bonder has been developed to truly provide an elasticity, unlike anything we’ve seen before. The bonder cures from the outside to the inside of the bond, rapidly curing the extension to the natural lash, without the effects of blooming (extensions turning white from shock curing). Our superbonder is perfect for a lash artist using any PLA adhesive.

Fast Facts:

15 ml bottle
Do not use on client's skin.
Made and packaged for Paris Lash Academy in the UK
Must be used at room temperature.

Directions:

Before use, make sure bonder is used at room temperature. Bonder will be viscous when cold and must be warmed to room temperature and mixed prior to use.
After the lash extension has been applied, you need to wait 2-3 minutes, and then take a micro brush and apply a very small amount of bonder, only at the joint. Do NOT soak the lashes.
And most important step: let the bonder set! Don’t rush to use a fan or nano mister immediately after applying.
To simplify it: after you apply the last lashes, wait 2 mins for the extension to dry, then apply a small amount of bonder using a micro brush( do not have the micro brush soaking wet). After thoroughly brushing the bonder through the base of the extension, wait 2 more mins for the bonder to work ( do not use a fan or nano mister right away).

Do not use in any other capacity.
Liquid products, including adhesive, primers, bonders, and cream based products cannot be returned.

Do you need a nano mister?

If you use a bonder you DO NOT need a nano mister.
If you use nano mister out of habit, use it AFTER the bonder, and make sure the bonder is fully dry and activated.
NEVER put Supreme Bonder in your nano mister.

Can I use it wrong?

YES!
If you use too much Supreme Bonder you may weaken the bond. Or if you have super high humidity (over 75%), your adhesive will cure quickly without a bonder, so applying Supreme Bonder would be similar to using too much product.

MSDS

Section 1 – Chemical Product and Company Identification

MSDS NAME

Supreme Bonder

COMPANY ADDRESS

1285 Financial Blvd

Reno, Nevada

89502

Adhesive cure aid

Section 2 – Composition and Ingredient Information

Ingredient Component Name

Humectants(e.g Glycerine) 10%

Emollients e,g, Peg-7 glyceryl cocoate) 5%

Bulking agents (e.g. Sodium polyacrylate) 5%

Additional ingredients (e,g vitamins, proteins, plant extracts 5%

Emulsifying agents (e.g Ethylhexyl stearate) 5%

Thickeners (e.g. Cellulose derivatives) 5%

Preservatives, antimicrobials 1.5%

Aqua Water to 100%

Proprietary blend

Ethanol containing solution

Section 3 – Hazards Identification

Hazard Risk Classification

Category 2 for skin and eye irritation

Potential Health Effect

Eye: Causes eye irritation

Skin: Causes skin irritation

When used properly the product is safe and tolerable in accordance with the legal provisions (Article 3 of the EC Cosmetics Directive.)

Section 4 – First Aid Measures

Inhalation	Not expected
Eye Contact	Inadvertent contact with eyes:rinse thoroughly with plenty of lukewarm water immediately;if irritation persists consult ophthalmologist as a precautionary measure
Skin Contact	Gently wash with mild soap and water. If irritation occurs, seek medical attention. If clothing is contaminated, remove and wash before reuse
Ingestion	Drink plenty of water. Seek medical attention.
	Inadvertent ingestion of larger amounts, do not induce vomiting. Rinse out of mouth and drink about one glass of water. Where appropriate, consult the poison control centre of the doctor.

Section 5 – Fire Fighting Measures

Specific Hazard	N/A
Flash Point	N/A
Hazardous Decomposition Materials	NA
Suitable Extinguishing Media	All common extinguishing agents are suitable
Protective Equipment	NA

Section 6 – Accidental Release Measures

Personal Precautions (for non-emergency and emergency responders)

Wear appropriate protective equipment. Stop leak if without risk.

Environmental precautions

Do not bring it into the eyes. Packaging should be recycled after residual emptying. Filled, unused packages must be disposed of separately in accordance with the waste management directives of the municipality

Disposal and Clean Up

In the event of spillage/leakage, mop up main volume with cloths;when larger amounts are involved, dispose of cloths and mopping up material by controlled disposal-risk of fire. Remove rest with plenty of water and common cleaning agent

Section 7 – Handling and Storage

Handling Precautions

Avoid contact with eyes, skin, and clothing. Keep out of the reach of children

Must be used in accordance with manufacturer’s instructions. Observe any warnings on packaging. Store in a cool and dry place (room temperature) Product may be flammable. Do not expose to extreme heat (e.g. sunlight). do not store close tonaked flames or sources of heat or use in direct vicinity.

Section 8 – Exposure Controls and Personal Protection

Exposure Limits

No limit value which is to be controlled is defined

Personal Protective Equipment

Breathing protection

N/A

Not necessary

Hand protection

Body protection

No special protective gloves necessary

No special protective measures necessary

Section 9 – Physical and Chemical Properties

Physical State	Colourless
Odour	Slight or characteristic
pH	6.5-7.5
Boiling Point	N/A
Flash Point	N/A
Flammability	Non-combustible
Evaporation Rate	N/A
Ignition Temperature	N/A
Melting/Freezing Point	N/A
Solubility	Water Soluble
Vapour Density	N/A
Vapour Pressure Density	N/A 0.97-1.01 g/ml

Section 10 – Stability and Reactivity

Reactivity	Stable under normal conditions.
Stability	Excess heat, ignition sources, incompatible materials.
Conditions to Avoid	None in case of correct treatment and storage
Incompatible Materials	No dangerous reactions known
Hazardous Decomposition Products	No decomposition if used correctly

Section 11– Toxicological Information

Inhalative Toxicity	N/A
Skin Irritation	May cause skin irritation
Eye Irritation	May cause irritation to eyes
Carcinogenicity	No data available
Acute Toxicity Mutagenicity, cancerogenic,reproduction toxicity	No data available Not known

Section 12– Ecological Information

Ecotoxicity	No data available
Persistence/Degradability	No data available
Bioaccumulative Potential	No data available
Mobility in Soil Other	No data available In the case of appropriate handling and use, no ecological problems are to be expected

Section 13– Disposal Consideration

Dispose in accordance with applicable regional, national, and local laws and regulations.Packaging which cannot be cleaned has to be disposed in the sam way like the substance itself

Section 14– Transport

No dangerous goods according to the transport regulations

Section 15– Regulatory Information

The product is classified according to the EC guidelines and applicable national laws.

Section 16– Other Information

The information contained in this document is based upon our current level of knowledge and reflects our best professional judgement in which the product is delivered, but does not offer any guarantee or warranty. Neither our company nor any subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained in this document. All materials may present unknown. This information is provided with the condition that the person receiving it will make their own determination of the suitability of the product for their particular use.

Currency